Odorcide® Smoke Brake is a safe and effective tool for eliminating tough odors caused by tobacco and marijuana.
SPRAYER APPLICATIONAdd 2-4 oz of concentrate to 1 gallon of water. Apply directly to surfaces affected by tobacco smoke. It is important to ensure that Odorcide® Smoke Brake reaches the odor source at a concentration equal to or greater than the source of the odor. Absorbent cloth materials must be saturated to guarantee the solution reaches the malodor. If possible, allow the items to air dry (fans or dryers can be used to accelerate the process). Repeat, if necessary, to effectively reach the odor source in all areas.
FOGGER SYSTEMSRemove all unattached items such as drapes, rugs, furniture, etc. from the affected area and treat with Odorcide® Cigarette Smoke according to the directions below. Close all windows & doors, cover any sensitive items that can’t be removed and turn on the central heating/air conditioning system. Dilute product per instructions and add to the fogger, carefully following the directions supplied with the unit. Ensure all people and pets are out of the area.
Recommended Settings:
• Small Rooms – low setting
• Large Rooms – low or medium setting with fans
• Large Rooms – high setting if not using fans
Fans help force Odorcide® Smoke Brake into cracks and crevices where the odor source may be difficult to treat. The length of time fogging depends on the severity of the smoke and the size of the affected area. The concentration can also be varied depending on the severity of the odor.
VEHICLESDilute 2-4 oz per gallon of water into a trigger sprayer or use a ULV fogger. Lightly spray onto the vehicle's interior surfaces and into the exhaust ports/vents of the heating/air conditioning system. Allow to air dry and use fans if possible. Repeat, if necessary, to eliminate any remaining odor. As with other applications, Odorcide® Smoke Brake must reach the odor source at a concentration equal to or greater than the smoke odor source.
